Resume Update

SUMMARY

Ⅰ. Experienced mechanical design for 25 years.

  Developed representative machine and parts below.

1)10MPa Waterproof (100m Water Depth) Case,

    Mic and Speaker for Cellular Phone.

2) Racing Engine Cylinder Block and New Intake System

    for Formula1.

3) Aircraft Structure Design for BOEING Commercial Air Plane.

Ⅱ. Staff management.

1.  Experienced 10 staff management.

2.  Achieved maintaining a high member operating rate with adjust the amount of work that changes from time to time with the client side.

3.  Achieved a high output quality and speed by promoted standardization to enhance the operator's skill.

4.  Achieved a high reputation in HONDA and Nissan Light Truck.

Ⅲ. Work experience with overseas

1.    Experienced working in the same team as the business trip employees five of Boeing at Fuji Heavy Industries.

2.    Experienced the TV conference of the each location, United States and Spain at Nissan Lite Truck.

Ⅳ. Strong point.

1.     Waterproof seal technology for Cellular Phone.(Published Patent 12)

[Compact sealing technology with 100m depth waterproof]

2.     Waterproof microphone & speaker technology for Cellular Phone.

　　　(Published Patent 5)

[Maintain performance after 100m depth water pressure]

3.     Waterproof connector technology for Cellular Phone.(Published Patent 6)

[Anytime able to connect and disconnect, even state wet with a water]

*1,2,3 is innovation of waterproof technology that becomes the world's first when it is realized.

4.     Intake technology for automobile.(Static & Dynamic reaction understanding)

     5.    Tolerance analysis that is important elements of the quality
            and cost understanding.

PROFESSIONAL EXPERIENCE (from recent)

Apl.2011 – Present

Technopro design

[Number of Employees] 5800

[Amount of Sales] 385 hundred million yen

[Business] Dispatch industry

Jun.2013 - Present

Dispatched HONDA Automobile R&D Center Powertrain Development Department

Developed the engine electrical harness and around fuel supply parts

 with led the 7 members.

< Element technology>

Component layout of negotiating with foreign department, Strength analysis, 

Tolerance analysis,Cost calculation, Mechanical drawing, Bounties created, Technical negotiations with manufacturers,Design review corresponds, Factory request handling, Creating mass production approval document,Creating for business standardization manual.

< Major Accomplishments>

* Achieved the early launch by establish appropriate organization and business flow.

* Achieved performance comparable to customer output by establishing flow with a temporary staff configuration.

* Achieved a expand business content and increase personnel number

  5 to 8.

* Achieved a technique for quickly noise analysis to improve the specifications

  considered speed.

* Achieved a responsible model expansion in.

Apl.2011 - May.2013

Dispatched NISSAN Motor Light Truck Powertrain Development Department

Developed the engine around bracket, piping and hose parts with led the 10 members.

< Element technology>

Component layout of negotiating with foreign department, Strength analysis, Tolerance analysis,Cost calculation, Mechanical drawing, Bounties created, Technical negotiations with manufacturers,Design review corresponds, Factory request handling, Creating mass production approval document,Business cooperation with overseas bases (the United States, Spain and Thailand)

< Major Accomplishments>

* Achieved a success in the establishment of new business contract.

* Six months after the expansion to 11 staff members

  from 4 staff at the start.

* Solved the serious acoustic problems that occurred in the intake system

   in simulation and one trial.

* Achieved release of drawing delay zero during the contract period.

Oct.2005 - Sep.2008

UNI-TECHNOS

[Number of Employees] 13

[Amount of Sales] 1 hundred million yen

[Business] Dispatch industry

Dispatched Casio Hitachi Mobile Communications Mechanism Designing Division

< Element technology>

Housing integrated packing, Waterproof connector, Developed around the water pressure resistance speaker and microphone, Development policy decision, Basic experimental plan,

Experimental equipment preparation, Cooperation manufacturer survey and negotiations,

Concept design, Waterproof casing evaluation method planning, Experiment, Measurement,

Result Summary Report, Patent application

< Major Accomplishments>

* Achieved the waterproof performance of 50 times (2m to 100m)

  a present cellular phone in the element technology.

* Achieved the prototype 100m depth waterproof connector that is anytime able to connect and disconnect, even state wet with a water.

* Developed the case to keep a waterproof performance even if case

  does transformation by the 2m dropping impact.

* Achieved biggest result that is developed hydraulic pressure proof acoustic structure without spoiling the acoustical performance.

* Registered patent numbers. [ Domestic : 23  -Global : 1 ]

* Achieved the dispatch destination house top in the number of patent applications at 2008 first half.

Apl.2004 - Sep.2005

VSN

[Number of Employees] 2800

[Amount of Sales] 176 hundred million yen

[Business] Dispatch industry

Dispatched RICOH Mechanism Designing Division

Development and design of the printer fixing unit

< Element technology>

Mass production confirmation test, Data Summary, Problem analysis, Countermeasures planning

< Major Accomplishments>

* Developed feedback control to stabilize Establish Unit for printer system.

* Achieved the reduce 70% of problem by feedback control.

Oct.2001 - Mar.2004

BUN-TECHNO

[Number of Employees] 1000

[Amount of Sales] 20 hundred million yen

[Business] Dispatch industry

Dispatched TOYOTA MOTOR Formula1 Racing Engine Development Division

F1 engine development design

Cylinder block main representative in Japan development bases, Intake port development vice

< Element technology>

Strength analysis, Fluid analysis, Engine performance simulation, Tolerance calculation

Mechanical drawing, Bounties created, Technical negotiations with manufacturers, Parts layout,Cylinder block design of the experimental single-cylinder engine, Intake port design,

Cylinder block design of the actual run engine, New piston cooling system design,

Cylinder interference analysis of the intake pulsation using acoustic

< Major Accomplishments>

* Achieved delay less development schedule with designed Single-cylinder engine

* Achieved greatly improve the durability with an ideal piston cooling structure applied in the F1 engine with less space.

* Developed the New Intake System using the effect of the inertia supercharging

* Achieved New Intake System obtained the analytical result that suction volume efficiency 

was greatly improved. This result is high evaluation from Germany race team

* Achieved great result in actual race by developed piston cooling system.

Dec.1995 - May.2001

ALPS-GIKEN

[Number of Employees] 2800

[Amount of Sales] 23 hundred million yen

[Business] Dispatch industry

Feb.2000 - May.2001

Dispatched HONDA Automobile R&D Center Production Technology Department

Race engine production technology design

< Element technology>

Engine development jig-tool design, Equipment design, Intake port development for racing engine

< Major Accomplishments>

* Awarded the temporary staff's first improvement proposal award 

 at the jig design of race engine.

* Participated in the intake port for F1 development at the suggestion of the design.

* Achieved a good result in the test designed intake port.

May.1998 - Jan.2000

Dispatched Fuji-Heavy-Industries Aircraft Structure Designing Division

< Element technology>

Airframe parts detail 3D modeling of B767-400ER, Mechanical drawing, Creating parts list

< Major Accomplishments>

* acquired complex material structure and the aircraft design standard.

* acquired English in practice and Boeing headquarters employees

Dec.1995 - Apl.1998

Dispatched OKI Electric Mechanism Designing Division

< Element technology>

Concept design of automatic exchange (MDF), Detail design, Prototype assembly, Strength test

< Major Accomplishments>

* Realized took over the development theme of automatic exchanger structure that customer representative was impossible.

* Achieved in making the cost review the basic structure of the housing and about

  a third of 1 (22 → 7 million yen).

* Achieved 77% cost cut for the case.

* The currently series of in the number of terminals as main models sold to the world.

Apl.1994 - Apl.1995

MEITEC

[Number of Employees] 6800

[Amount of Sales] 168 hundred million yen

[Business] Dispatch industry

Dispatched TOKYO KOKU KEIKI Precision Machine Engineering Division

Aircraft oxygen generator developed members

< Element technology>

Support fighter F-2 for compressed oxygen compressors for concept design, Detail design,

Mechanical drawing, Parts measurement, Performance test

< Major Accomplishments>

* Achieved volume ratio 40% decreased the size of the customer's prototype model that is a reciprocating compressors for compressed oxygen.

* Equipped to support fighter F-2.

Apl.1989 - Mar.1990

HONDA MOTOR

[Number of Employees] 23000

[Stated capital] 860 hundred million yen

[Business] Automotive manufacturing industry

< Period employee>

Body assembly Division

< Element technology>

Rear pillars and the seat belt assembly of the Accord, The assembly roof trim Prelude

Apl.1987 - Mar.1989

KEIHIN

[Number of Employees] 22000

[Stated capital] 69 hundred million yen

[Business] Automotive parts manufacturing industry

Mechanism Designing Division

Dispatched to the Honda Technical Research Institute to learn the development techniques.

< Element technology>

Jig design for development, Mechanical drawing, Tolerance calculation,

Parts dimension measurement, Development test data measured

and summarized

Experienced using CAD and analysis system software.

l  CATIA V5 & CAT Analysis

l  Pro-E WF2 & Mechanica

l  GT-POWER

Patent acquired patent rights in individual

Waterproof microphone for portable electronic equipment [Jan.2010]

長いな＾＾；